Analogue LCD Countdown Timer
Our Analogue LCD Countdown Timer offers convenience and flexibility. It can be located anywhere applicable. A 3-button switch control panel provides simplistic count-up/count-down functionality, and displays Month, Day, Date when not in timer mode.
16″ (40.64cm) Black Standard
Part # 220001LT – Battery
13″ (30.02cm) Brushed Aluminium
Part # 510006LT – Battery
Additional Custom Logo Designs Available
Standard Arabic 12/60
Part # SA60
Standard Millitary 12/24
Part # SM24
- Solid, Durable Casing
- Polycarbonate and Glass Lens
- Easily Viewable LCD
- Displays Month, Date, Day
- Count-Up/Count-Down Modes
- Battery Operated (2 D-Cell)
- Automatically Adjust for DST
- Maintenance Free
Our Analogue LCD Countdown Timer has a clear easy to view LCD digital panel on the dial face that is controlled by a switch panel. The analogue dial face can be either in a 12 hour format or a 24 hour format. The 24 hour format is ideal for hospital environment where time is charted in a 24 hour format.
The combination of this analogue clock and timer is available in a 16″ black standard casing or a 13″ brushed aluminium casing. The performance and operation of both styles is identical. The switch controller is separate from the actual clock. It is tethered to the clock with a LAN type cable (not supplied).
The controller has three buttons; set, start and stop. These simple to use buttons will activate the timer. When the timer is not activated the LCD displays the day, date and month. If the timer is activated in the countdown mode the digital display panel will show the remaining time. In the count up mode the digital display will show the elapsed time.
The clock is part of the KRONOsync master clock system. The transmitter will broadcast the time code throughout a customer’s facilities creating a matrix type coverage area that allows you to install a clock any place any time.
Many customers will mix and match clocks combining other sync clocks with countdown timers or other Innovation Wireless products such as our message boards. With our system you are able to combine both timing and communication products and operate them on the same system.
The analogue portion of the timer will display accurate time because it receives accurate GPS or NTP from the transmitter. The transmitter’s time source can either be from GPS or from NTP (Network Time Protocol).
Whatever time source you decide both are easy to install and no maintenance or upkeep is required. The transmitter will broadcast the time code from either time source. The receiver module on the LCD analogue timer will pick up the time and the analogue portion will display the time.
The LCD panel of the Analogue LCD Countdown Timer which displays the countdown or count up information is 1.375″ by 4″ on the 13″ brushed aluminium framed clock and 1.75″ by 5″ on the 16″ ABS framed clock. These LCD panels provide for able viewing from a respectable distance and angle. If you are looking for a software controlled countdown timer we offer this in our IP – PoE Communication System.
The one item that you must determine is how far the switch controller will sit with respect to the placement of the clock. It is best to use a typical LAN cable to connect the controller to the clock. We do not provide the cable due to the various lengths that customers may need.