Flush Mount Clocks

Flush Mount Clocks in stainless steel casing and glass lens, specifically designed for operating theatres, laboratories and clean room environments. IP66 rated.

Flush Mount Clocks ZAM5-L PoE & ZBM5-L PoE for operating theatres, laboratories and other clean room environments

These Flush Mount Clocks are available with 50 mm high digits, 4-digit (HH:MM) and 6-digit (HH:MM:SS) versions. Designed to meet operating theatres standards – stainless steel casing and glass face. The clocks can be additionally equipped with a flush-mounted stainless steel remote control necessary to operate the stopwatch function. They also offer the option of an alternating time and date display. The clocks are managed via the web panel or via dedicated RGB Clock Set software.

The latest ClockSet software (version 1.07) is software designed to manage a network of clocks. You can easily send the configuration to a large number of displays. In the latest version, we have now added the function “email notification” so in the case of a clock failure you will receive an email. This version is available here under the ‘Downloads’ section.

Power and synchronisation is achieved via a single network cable utilising Power over Ethernet IEEE 802.3at Mode A (PoE+) The clocks are equipped with female RG45 sockets in the main clock casing behind the front panel to this end.



ZAM5-L PoE Flush Mount

ZAM-5L PoE Tech

ZBM5-L PoE Flush Mount


Wired Remote Control

Wired Remote Control Tech
ZA5-L PoE Flush Mount (4-digit)

ZAM5-L PoE Flush Mount


ZB5-L Flush

ZBM5-L PoE Flush Mount


Wired remote control

Wired Remote Control


Model: ZA5-L PoE Flush Mount ZB5-L PoE Flush Mount
Display format: hh:mm hh:mm:ss
Power supply: Power over Ethernet IEEE 802.3at Mode A (PoE+)
Operating temperature (ambient): -25°C ÷ 45°C
Operating temperature (surface): -25°C ÷ 60°C
Environment Protection Rating: IP66
Average power consumption: 10W 14W
  • Super bright wide-angle selected LEDs
  • Legibility even in direct sunlight (automatic brightness control)
  • Module construction, easy installation and maintenance
  • Additional functions: stopwatch
  • Clocks are operational via LAN interface, optionally with wired remote
  • Possible synchronisation with NTP server
  • Optional accessories: GPS receiver, temperature probe
  • As standard clocks are wall flush mounted
    ü Stainless steel case with glass face (can be cleaned with industrial cleaning supplies)


Please Share

Pin It on Pinterest