Tone Generator & Bell System Controller Specifications

Tone Generator Specifications

 

Tone Generator Specs

  • Connects into PA System or Bell
  • Synchronised with Transmitter
  • Selectable Tones and/or Music

Dimensions: 3.25″ L x 5.6″ D x 0.75″ H (8.255 cm x 14.224 x 1.905 cm)

Weight: 0.3 lb (0.13kg)

Power Supply: Input: 240 VAC, 50/60 Hz 10 Watt Output: 5 VDC 0.5 Amp (6′ (1.83m) cord)

Audio Output: Balanced or Unbalanced depending on cable used

Bell Controller Element Specifications

 

Dry Contact Output: Normally Open/Normally Closed Relay 240 VAC, 4.4A Maximum

Pre-Programmed Tone Selection

Note: Any mp3 recording can be loaded onto the unit’s SD card

Pin It on Pinterest